Razer Hammerhead True Wireless Earbuds: Features and Specs

by October 17, 2022 0 comments

You may deepen your experience with the brand-new Razer Hammerhead True Wireless, cutting-edge headphones that will rule the soundscape. With ANC, a 60ms low latency gaming mode, and a gadget made to sparkle in a blaze of RGB brilliance, prepare your senses for an audio experience, unlike anything you’ve ever heard.

Features of the new Razer Hammerhead True Wireless earphones are listed below

  • The ultimate wireless earbud flex lets you express your style and stand out from the crowd with 16.8 million colour options and various effects.
  • With Active Noise Cancellation, which recognizes and cancels out undesired ambient noise, you can focus on whatever you’re doing, whether gaming, watching a movie, or dancing to your favourite tunes.
  • For a more fluid gaming experience on Bluetooth devices, turn on Gaming Mode to boost the Razer Hammerhead True Wireless’ top performance.
  • With the new design, you may have a cosy, safe in-ear fit that improves noise isolation. Includes multiple ear tip sizes for individualised comfort levels.
  • Voice communication on the Razer Hammerhead True Wireless is now crisper than ever, thanks to intelligent microphones that can detect, identify, and minimise harmful background noise.
  • Utilise the Razer Audio app to its full potential. With over-the-air firmware upgrades, you may adjust Razer ChromaTM RGB settings, remap touch gestures, personalise the EQ, and benefit from ongoing enhancements.

Is Bluetooth audio from the Nintendo SwitchTM compatible with the Razer Hammerhead True Wireless?

Yes! First, make sure the most recent software is loaded on both devices. The Razer Audio App may be used to update the Razer Hammerhead True Wireless. The next step is to connect your headset by simply following the Nintendo Switch’s Bluetooth audio connection instructions.

How to turn on Quick Attention Mode and Active Noise Cancellation?

There are two methods. The first method is to tap and hold either earbud for two seconds. When each mode is turned on, audio indications such as “ANC On” or “Ambient On” will let you know. Repeating the gesture will alternate between the two settings. In the Razer Audio mobile app, you can switch between Active Noise Cancellation and Quick Attention Mode.

Technical Specifications


  • Response to frequency: 20 Hz–20 kHz
  • 32 15% Impedance
  • Sensitivity at 1 kHz: 91 3 dB
  • 8 mW maximum input power
  • Drivers: 13 mm Weight: around 45.0 g


  • Response to frequencies: 300 Hz to 5 kHz
  • The ratio of signal to noise: 55 dB
  • Sensitivity: -42 3 dB (@1 kHz).
  • Omnidirectional pick-up pattern
  • Controls for the music: Play, Pause, Skip, Previous
  • Call controls: pick up, decline, hang up, and end
  • General: Connect, turn on, and use your smartphone’s virtual assistant

Battery Type

  • Rechargeable Li-Po battery, 275mAh Capacity Rating
  • The earbuds’ battery life is 4 hours, with a further 12 hours with the charging case
  • Up to 1.5 hours of charge time *Depending on the use


  • Range of Bluetooth devices: up to 10 metres/30 feet


  • Available for iOS 11 and AndroidTM 8.0 Oreo smartphones (or higher)
  • Codecs supported: SBC and AAC

No Comments so far

Jump into a conversation

No Comments Yet!

You can be the one to start a conversation.